*Image shown is a representation only. Actual product may vary.
Product overview
60 RPM Min, 4500 RPM Max
Manufacturer
Sharp
Part number
TMV
Condition
New
Review the specifications below to confirm compatibility with your application.
Specifications
| Minimum Spindle to Column Distance (Decimal Inch) | 9.8000 |
|---|---|
| Minimum Spindle to Column Distance (mm) | 248.92 |
| Minimum Spindle to Table Distance (Decimal Inch) | 5.3750 |
| Minimum Spindle to Table Distance (mm) | 136.52 |
| Maximum Spindle to Table Distance (mm) | 429.00 |
| Maximum Spindle to Table Distance (Decimal Inch) | 16.9000 |
| Table Length (Inch) | 54 |
| Minimum Spindle Speed | 60 |
| Table Width (Inch) | 10 |
| Maximum Spindle Speed (RPM) | 4500 |
| Forward Head Tilt (Degrees) | 45.00 |
| Phase | Three |
| Backward Head Tilt (Degrees) | 45.00 |
| Left-Hand Head Tilt (Degrees) | 90.00 |
| Left-hand Head Tilt | 90 |
| Right-hand Head Tilt | 90 |
| Cross Travel (Decimal Inch) | 16.3000 |
| Cross Travel | 16.3 |
| Longitudinal Travel | 39.00 |
| Longitudinal Travel (Decimal Inch) | 39.0000 |
| Knee Travel (Decimal Inch) | 15.3000 |
| Knee Travel | 15.3 |
| Horsepower | 3.00 |
| Voltage | 220/440V |
| Table Load Capacity (kg) | 299.37 |
| Table Load Capacity (Lb.) | 660.00 |
| Spindle Speed Control | Variable Speed |
| Number Of T-slots | 3 |
| Number of Spindle Speeds | Variable |
| Overall Height (Decimal Inch) | 91.7800 |
| Overall Height (mm) | 2333.63 |
| Overall Length (Decimal Inch) | 70.0000 |
| Overall Length (mm) | 1778.00 |
| UNSPSC Code | 23242503 |
| Overall Depth (Decimal Inch) | 75.0000 |
| Overall Depth (Mm) | 1905.00 |
| Includes | Tapered Gibs for Adjustment; Column & Base; Spindle Runout of No More than 0.0002 Inch TIR; Hardened and Ground Box Ways; One Shot Lubrication with Back Flow Value; Head Tilt Side to Side and Up & Down |
| Maximum Spindle To Column Distance (mm) | 718.00 |
| Maximum Spindle to Column Distance (Decimal Inch) | 28.3000 |
| Certification | ISO-9002 |
| Mfr# | TMV |
Please confirm the manufacturer part number and specifications before ordering.
Strike knowledgebase
Product Sourcing Notes
TMV is listed for Sharp and described as 10 x 54" Knee Milling Machine: 3.00 hp, Variable Speed, Three in Milling Machines . Use this page to confirm the part number, availability, product family, and application details before requesting a quote.
- Manufacturer part number: TMV
- Strike SKU: TMV-MSC-77718443
- Manufacturer: Sharp
- Catalog family: Milling Machines
- Availability: request a quote
