*Image shown is a representation only. Actual product may vary.
Product overview
KC5025, TiAlN Finish, Neutral, 12.90 mm Long, 1/2" Inscribed Circle, 1/32" Corner Radius, 80.00 deg C - Diamond (Rhombic), Series KENLOC
Manufacturer
Kennametal
Part number
2229659
Condition
New
Review the specifications below to confirm compatibility with your application.
Specifications
| Insert Style | CNMG |
|---|---|
| ANSI Size Code | 432 |
| ISO Size Code | 120408 |
| Insert Shape | C - Diamond (Rhombic) 80-Deg |
| Included Angle | 80.00 |
| Inscribed Circle (Decimal Inch) | 0.5000 |
| Inscribed Circle (Inch) | 1/2 |
| Corner Radius (Inch) | 1/32 |
| Corner Radius (Decimal Inch) | 0.0313 |
| Insert Material | Carbide |
| Manufacturer Grade | KC5025 |
| Relief Angle | 0.000 |
| Wiper Edge | No |
| Insert Thickness (Inch) | 3/16 |
| Insert Thickness (Decimal Inch) | 0.1875 |
| Insert Hand | Neutral |
| Series | KENLOC |
| Chip Breaker Operation | Medium Machining; Roughing |
| Grade Characteristics | Aluminum & Non-Ferrous (N) - Moderate Wear-Resistance and Toughness; Steel (P) - Moderate Wear-Resistance and Toughness; Cast Iron (K) - Moderate Wear-Resistance and Toughness; Special, Super Alloys (S) - Moderate Wear-Resistance and Toughness; Stainless Steel (M) - Moderate Wear-Resistance and Toughness |
| Side Clearance | Negative |
| Number Of Cutting Edges | 4 |
| Hole Diameter (Decimal Inch) | 0.2031 |
| Hole Diameter (mm) | 5.16 |
| Maximum Depth of Cut (mm) | 1.25 |
| Maximum Depth of Cut (Decimal Inch) | 0.0492 |
| ANSI Insert Code | CNMG432 |
| ISO Insert Code | CNMG120408 |
| Insert Holding Method | Pin; Clamp |
| Width (Inch) | 1/2 |
| Clearance Code | N |
| Tolerance Code | M |
| Coating Process | PVD |
| Rake | Negative |
| Insert Length (Decimal Inch) | 0.5077 |
| Insert Length (mm) | 12.90 |
| Primary Workpiece Material | Stainless Steel; Superalloys & Titanium |
| Primary Workpiece Material Code | P; S; K; M; N |
| Secondary Workpiece Material Code | P; K; M; N |
| Standards | ISO; ANSI |
| Manufacturers Catalog Number | 2229659 |
| Material Grade | C6; C2 |
| Coating Classification | PVD |
| Chip Breaker | MS |
| Rake Angle | 13 |
| Cutting Edge Style | Honed |
| Industry Standard Number | CNMG432MS |
| Width (Decimal Inch - 4 Decimals) | 0.5000 |
| Multi-Use Tool | Yes |
| Full Radius | No |
| Multi-Use Application | Facing; Turning; Boring |
| UNSPSC Code | 23242105 |
| Mfr# | 2229659 |
Please confirm the manufacturer part number and specifications before ordering.
Strike knowledgebase
Product Sourcing Notes
2229659 is listed for Kennametal and described as Turning Insert: CNMG432MS KC5025, Carbide in Indexable Inserts . Use this page to confirm the part number, availability, product family, and application details before requesting a quote.
- Manufacturer part number: 2229659
- Strike SKU: 2229659-MSC-05848999
- Manufacturer: Kennametal
- Catalog family: Indexable Inserts
- Availability: request a quote
